| Entered exhibits of the Gold Medal MSV 2009 |
|
FABA |
 | Manufacturer: ARI – Armaturen Albert Richter GmbH & Co.
Exhibitor: ARI – Armaturen Albert Richter GmbH & Co., http://www.ari-armaturen.com/
Category: Commercial product (without further specification)
Annotation: 3 version of a product FABA, which are diverse mainly with their usage.
FABA®-„Plus“ – valve for all standard applications. Extra-tight shut-off due to conical marginal seat geometry with „cut off effect“.
Surface deposits are removed from the seat when closing. The valve keeps durably tight shut-off.
FABA®-„Supra i“ –solution for ambitious industrial applications.
Due to the reinforced and shielded bellows seal – welded to the top part of the bonnet.
FABA®-„Supra C“ – For the chemical industry. With reinforced and flushed bellows seal – welded to the top part of the bonnet.
Suitable for process pipes. |
|
| E - Drive |
| Manufacturer: Mold Masters Europa GmbH
Exhibitor: Mold Masters Europa GmbH, http://www.moldmasters.com/
Category: Energetically effective commercial product
Annotation: E-Drive is new, electric valve gating solution for multi-cavitation injection mold. E-drive is operated with electric power, instead of existing hydraulic oil or pneumatic (compacted air). This change of medium has geat advantages in saving of electric power and acceleration of molding cycle, time for opening and closing of pin is 0,1 second, by existing is this time 4 times slower. |
|
| High Speed Machining Robot RX 170 HSM |
| Manufacturer: Stäubli Faverges SCA
Exhibitor: Stäubli systems, s.r.o., http://www.staubli.com/
Category: Commercial product (without further specification)
Annotation: RX 170 HSM (High Speed Machining) Robot with a high speed spindle integrated in the forearm. This robot has a specific wrist (foundry) designed for integration of high speed spindle and that is way is improved rigidity a precision. All cables run inside the arm and high speed spindle management is integrated in robot controller. |
|
| TR Hi 150 |
| Manufacturer: G-Team, a.s.
Exhibitor: G-Team, a.s., http://www.g-team.cz/
Category: Energetically effective commercial product
Annotation: The turbine TR Hi 150 is special machine designed for the steam pressure reducing, for extremly low steam flow and for high demand of safety mechanical operation and high efficiency. The turbine casing with the el.generator stator creates one unit without coupling and others rotating parts. The turbine rotor is overhunged on the high frequency generator rotor. The rotor tightness against the steam leakage is ensured by special gland. In the turbine scope is oil system for regulation and lubrication. |
|
| Industrial gears |
| Manufacturer: Getriebeban NORD GmbH & CO.KG
Exhibitor: NORD – Poháněcí technika s.r.o., http://www.nord.com
Category: Energetically effective commercial product
Annotation: NORD industrial gear units have been developed according to the tried-and-tested unicase housing principle. The unicase is a one-piece housing, into which all the bearings are integrated. The finishing of this unicase is carried out with in unique jig, on state-of -the-art CNC machines. The unicase concept features highest levels of precision, rigidity and strength.
The unicase principle allows the shaft axes to be staggered, resulting in a more compact design which allows the use of larger roller bearings to guarantee a long operating life. |
|
| Rockwell – Brinell, RB-1/PC |
| Manufacturer: Aquastyl Slovakia s.r.o.
Exhibitor: Aquastyl Slovakia s.r.o., http://www.aquastyl.sk/
Category: Commercial product (without further specification)
Annotation: The hardness tester serves for testing hardness of metals with the Rockwell method (according to STN EN ISO 6508) and partally the Brinell method (according to STN EN ISO 6506) for ball with diameter d = 2,5 mm. |
|
| Hydraulic crap shear– CNS 700 SM |
| Manufacturer: Žďas, a.s.
Exhibitor: Žďas, a.s., http://www.zdas.cz/
Category: Commercial product (without further specification)
Annotation: The hydraulic scrap shear CNS 700 SM is designed as easily displaceable. They are intended for cutting medium heavy and bar scrap. Adjustment of the scrap dimensions before shearing is carried out using the holder in the charging area and the width of the sheared scrap is reduced by means of the shear blades shape, being applied for a patent protection. Sliding of the compressed scrap into the shear part takes place by the instrumentality of the gravity. Hydraulic drive and movements of all hydraulic cylinders are generally controlled by the operator of the charging mechanism, by means of remote control. |
|
| Linx 7300 |
| Manufacturer: Linx Printing Technologies, Velká Británie
Exhibitor: Bottling Printing, s.r.o., http://www.bottlingprinting.eu/
Category: Commercial product (without further specification)
Annotation: Bottling Printing s.r.o. has launched its most advanced Continuous Ink Jet (CIJ) printer, with an exciting portfolio of features designed to help companies across a wide range of industries to reduce the costs of coding.
The Linx 7300 is designed to avoid the hidden costs of coding through the lowest possible running costs, minimised production downtime, error-free coding and future-proofing. Amongst its features are dynamically adjusted service intervals to ensure customers only pay for vital maintenance, the FullFlush™ automatic printhead cleaning system, mistake-proof refills with the new SureFill™ system and error-free code changes with QuickSwitch™ software.
Routine maintenance is minimal and, in contrast to other printers on the market, there are no expensive ink modules to replace. Similarly, there is no need to change the ink tank between services, another ‘hidden cost’ with some coding equipment.
A wide range of code formats is available, including logos and barcodes. |
|
| Powder Bell Inobell |
| Manufacturer: SAMES Technologies, http://www.sames.com
Exhibitor: IDEAL – Trade Service, s.r.o., http://www.itsbrno.cz
Category: Commercial product (without further specification)
Annotation: Powder Bell Sames Inobell is the best solution for flat and round parts powder coating. You can reach significantly higher transfer efficiency comparing to the standard powder gun. Single powder bell can replace 2 guns and can also achieve expressive powder savings thanks to its high thickness regularity. |
|
| MOVIGEAR |
| Manufacturer: Sew-Eurodrive GmbH&CO KG, http://www.sew.de
Exhibitor: Sew-Eurodrive CZ, s.r.o., http://www.sew-eurodrive.cz
Category: Energetically effective commercial product
Annotation: A systematic development approach was taken right from the design phase. MOVIGEAR® is distinguished by its high level of systém efficiency, a significant factor in reducing energy costs. The integration and coordination of all the drive components lead to a long service life and high systém availability. MOVIGEAR® is an intelligent systém with its own control concept. Its high-quality networking helps reduce startup time and supports monitoring and maintenance tasks. |
|
| Werth Video-Check IP 400 3D CNC |
| Manufacturer: Wertmesstechnik GmbH
Exhibitor: Prima Bilavčík, s.r.o., http://www.merici-pristroje.cz
Category: Commercial product (without further specification)
Annotation: The Werth VIDEO-CHECK series equipment meets precise accuracy requirements. The stress free stage design in particular ensures levels of accuracy that would otherwise be unachievable, and is unique world-wide. The machines in the Werth VIDEO-CHECK Gantry series (Fig.) satisfy the most stringent requirements in terms of accuracy and flexibility. Modern air-bearing technology in conjunction with refined detailed solutions in the mechanical construction justify the excellent features of this gauge, which is currently the most widely distributed in its class all over the world, and allows measurements down to 0.5 m to be realised. |
|
| The band saw machine Pegas 510 Top Speed |
| Manufacturer: Pegas-Gonda, s.r.o., http://www.pegas-gonda.cz/
Exhibitor: Pegas-Gonda, s.r.o., http://www.pegas-gonda.cz/
Category: Innovative exhibit created provably in cooperation of the companies with Czech research institution
Annotation: The band saw machine for cutting of bars made of ferrous and nonferrous metals. When designing the machine and controlling software, the maximum emphasis was made on the maximum use of the performance of modern tools with hardmetal cutting desks. Regarding the convention machines the version TopSpeed reaches 2x higher cutting performance and 2-3x higher value of the feed towards the cut and reaches 3x shortening of the cycle of the automatic cutting cycle. The increase of the cutting performance leads to the lowering of production expences, demand for energy and it lowers the number of machines for cutting of the material. |
|
| Variable Manipulation System |
| Manufacturer: Festo, s.r.o., http://www.festo.cz
Exhibitor: ČVUT Praha, fakulta strojní, ústav výrobních strojů a zařízení, http://www.fs.cvut.cz/u12135
Category: Innovative exhibit created provably in cooperation of the companies with Czech research institution
Annotation: Designed assembly is created as an educational system as a system with progressive and conventional automation components. System is made for verification of theoretical and practical possibilities of usage. The goal is to show differences among equivalent components of various types, its impact on final designed construction in dependence on a great deal of conventional and also brand new designed components concentrated into one technique system. The system consists of several subsystems, which can operate separately or together. Three working places, higher-level controlling system and table with ejecting holder belong to basic parts. |
|
| The TSM series motors |
| Manufacturer: VUES Brno, s.r.o., http://www.vues.cz
Exhibitor: VUES Brno, s.r.o., http://www.vues.cz
Category: Commercial product (without further specification)
Annotation: The TSM series motors are traction synchronous multi-pole motors excited by rare-earth-based (NeFeB) permanent magnets on the inner rotor. To achieve a high specific torque, they are designed with liquid cooling which secures the outlet of motor losses at a high degree of protection. The torque-speed curve of the TSM series motors is adopted for using in the range of low speeds, for direct traction drives (without using a gearbox) of trams, suburban rail transport, trains, trolleybuses, and road independent traction. |
|
| EPOCH 1000i |
| Manufacturer: Olympus Corporation, Japonsko
Exhibitor: Olympus Czech Group, s.r.o., http://www.olympus.cz
Category: Commercial product (without further specification)
Annotation: The EPOCH 1000 Series Digital Ultrasonic Flaw Detectors combines the highest level of performance for conventional portable flaw detection with the power of phased array imaging. The EPOCH 1000, 1000iR and 1000i feature a new horizontal case style with full VGA display, knob and navigation arrows for parameter adjustment, and full EN12668-1 compliance. The advanced conventional ultrasonic functionality of the EPOCH 1000 series is augmented in the EPOCH 1000i with phased array imaging capabilities. Available with Phased Array imaging package, EN12668-1 compliant, over 30 digital receiver filter selections, 6 kHz pulse repetition rate for high speed scanning, automatic phased array probe recognition, intuitive wedge delay and sensitivity calibration for all focal laws, programmable analog/alarm outputs, IP66 environmental rating for harsh environments, horizontal design with navigation panel and knob parameter adjustment, digital high dynamic range receiver, full VGA sunlight readable display, ClearWave™ visual enhancement package for conventional A-scan interpretation, reference and measurement cursors, standard dynamic DAC/TVG, standard onboard DGS/AVG. |
|
| J16XN – Four wheel front forklift |
| Manufacturer: Hyster Europe, Great Britain
Exhibitor: Phoenix-Zeppelin, s.r.o., http://www.p-z.cz
Category: Commercial product (without further specification)
Annotation: Four wheel front forklift with a Hyster J1.6XN electric drive is a forklift of an entirely new generation. Increased productivity, reliability, the newest ergonomic elements and low operating expenses are the main benefits of the innovation of the newest line of Hyster front forklifts. Zero turning radius, maintenance-free transmission, double AC drive, Vista lifting frame with unrivalled visibility and other structural elements guaranteeing excellent efficiency to the user of these forklifts. |
|
| Ecofold Box |
| Manufacturer: Plastové přepravní obaly, s.r.o., http://www.ppobaly.cz
Exhibitor: Plastové přepravní obaly, s.r.o., http://www.ppobaly.cz
Category: Commercial product (without further specification)
Annotation: The Ecofoldbox is compact folding system with a fixation (dunnage) inside with very simple intuitive folding construction. The fixation is thanks to clever construction closely caught up to box and currently it´s a component part of the box in folded position too. The fixation is really considerate to soft surfaces of stored products, it´s perfectly customizable and very easy to maintenance. |
|
| The ZARGES-CREAXESS online concept |
| Manufacturer: Zarges GmbH, http://www.zarges.de
Exhibitor: Zarges CZ, http://www.zarges.cz
Category: Commercial product (without further specification)
Annotation: Access steps and cross-over platform of the latest generation! CREAXESS is a completely new developed concept from the configuration to the assembly. Configure ideas online to true size! The CREAXESS-configurator guides you easily through the various design and adaptation possibilities. Very short delivery time!
The CREAXESS-concept: From your online order to production to delivery every step is perfectly tuned. So it needs only a few working days until you can assemble your products. Easy and fast assembly! Assembly in record time: This can be achieved by minimum plug- and bolt connections. Top-quality from the market leader!
You can be sure: ZARGES quality and design according to DIN EN ISO 14 122 and BGI 637. |
|
| SP 430 SY/2 |
| Manufacturer: Kovosvit Mas, a.s., http://www.kovosvit.cz
Exhibitor: Kovosvit Mas, a.s., http://www.kovosvit.cz
Category: Innovative exhibit created provably in cooperation of the companies with Czech research institution
Annotation: CNC lathe SP 430 SY/2 is the most complicated variant from the SP430 series with axis Y, a counter-spindle and a lower tool head with driven tools. |
|
| Tisys |
| Manufacturer: Transporeon, Polsko
Exhibitor: Transporeon, Polsko
Category: Commercial product (without further specification)
Annotation: TRANSPOREON provides a solution for transport logistics. This solution optimizes the transport planning process, distribution process, bringing as well direct as administrative savings in logistics. |
|
| 3axis milling head M3 ABC for portal milling machina |
| Manufacturer: F. Zimmermann GmbH, Německo, http://www.f-zimmermann.com
Exhibitor: F. Zimmermann GmbH, Německo, http://www.f-zimmermann.com
Category: Commercial product (without further specification)
Annotation: The milling head M3 ABC has three axes. The key to the innovation is the specially developed, very rigid and precise curved guideways of the B-axis. In spite of the three axes, the M3 ABC is amazingly compact. 3-axis simultaneous milling without pole situation and still large swivel ranges – this is only possible with the M3 ABC. M3 ABC enables time reduction up to 50% and additionally increased surface quality and accuracy. |
|
| Liquiphant M Density |
| Manufacturer: Endress+Hauser Instrument International AG
Exhibitor: Endress+Hauser Czech s.r.o.
Category: Commercial product (without further specification)
Annotation: Quality monitoring, calculation of concentration and product recognition based on on-line density measurement using vibration limit switch Liquiphant M with density calculator FML621. |
|
| Citizen Cincom A32-VII |
| Manufacturer: Citizen Machinery Co., Ltd.
Exhibitor: CNC – Invest, s.r.o., http://www.cnc-invest.cz
Category: Commercial product (without further specification)
Annotation: The machine provides is offers high stability & rigidity for efficient heavy-duty cutting. Thanks to its features like 45 m/min rapid feedrate, fast co-processor with new NC control M70 and CITIZENs unique “Streamline Control”, this machine achieves a 1.3 fold higher productivity that model A20-VII. Machine has 7 NC axis (X1, Y1, Z1, X2, Z2, C1, C2). The tooling system has a modular design. The machine is capable of operating with up to 27 tools, from these 9 rotary tools. Operating facility, high stability & rigidity, high accuracy as well as short machining times should be mentioned as further outstanding features of the newly developed Citizen machine. |
|
| Hybrid injection moulding machine ALLROUNDER 570 H 2000-800 |
| Manufacturer: Arburg GmbH + Co. Kg, http://www.arburg.com
Exhibitor: Arburg, s.r.o., http://www.arburg.cz
Category: Energetically effective commercial product
Annotation: The exhibit, hybrid injection moulding machine ALLROUNDER 570 H 2000-800 is a representative of a new modular injection moulding machines series called HIDRIVE. Machines series HIDRIVE use a new unique powerful combination of servo-electric drives with performance-adapted hydraulic accumulator technology, thereby they combine advantages both of the machine conceptions: electric with fully hydraulic ones. Series HIDRIVE is a new concept of injection moulding machines, that has not been used in the whole world yet. |
|
| Plain-tread bullet screw bolt |
| Manufacturer: Kuličkové šrouby Kuřim, a.s., http://www.ks-kurim.cz
Exhibitor: Kuličkové šrouby Kuřim, a.s., http://www.ks-kurim.cz
Category: Commercial product (without further specification)
Annotation: Conversion of the rotary into linear motion, by the use of the elastic deformation of the smooth shaft surface, onto which the balls roll, guided just in the thread profile of the preloaded nut. |
|
| W@M – Life cycle management |
| Manufacturer: Endress+Hauser Instrument International AG
Exhibitor:Endress+Hauser Czech s.r.o.
Category: Commercial product (without further specification)
Annotation: Data concerning a plant and its components is generated right from the first day of planning: in engineering and sizing, in procurement, in installation and commissioning, in operation and maintenance. Every phase of the life cycle of a plant and its components requires information.
W@M - Life Cycle Management is an open and flexible information platform with on-site tools and services supporting you along the life cycle.
From engineering, procurement, commissioning through operation, maintenance and the replacement of individual components, W@M provides up-to-date and complete information, including products of other instrument suppliers Availability of instrument data 24 hours a day 365 days a year |
|
| Mobile automation with the reservoir for 12 pallets |
| Manufacturer: Protechnik Consulting, s.r.o., http://www.protechnik.cz
Exhibitor: Protechnik Consulting, s.r.o., http://www.protechnik.cz
Category: Energetically effective commercial product
Annotation: Mobile automation with the reservoir for 12 pallets is intended for manipulation with the pallets or clamps and work-pieces from the reservoir to the table of the production machine and back. For example for exchanging of the work-pieces by the CNC-machines, welding lines, metal working shops etc. It is going about a universal automation for production machines used in different branches of industry. The automation creates one unit in combination with the machine. Mobile automation is patent pending.
The manipulator is the mean of the innovation. The manipulator is patent pending. Adaptation to the automated machine is done by the customer. |
|
| Robotmaster |
| Manufacturer: JABEZ Technologies Inc., Canada
Exhibitor: Sonetech, s.r.o., http://www.sonetech.cz
Category: Commercial product (without further specification)
Annotation: Robotmaster is CAD/CAM based off–line programming software for 6– or more axis robots. Robotmaster is an extension of Mastercam CAD/CAM system, from which it seamlessly integrates robot programming, simulation and code generation. |
|
| Škoda ForCity vehicle |
| Manufacturer: Škoda Transportation, a.s., http://www.skoda.cz
Exhibitor: Škoda Transportation, a.s., http://www.skoda.cz
Category: Innovative exhibit created provably in cooperation of the companies with Czech research institution
Annotation: The ŠKODA ForCity vehicle is a three-section modular tramcar for Prague Transportation Company (DP hl.m. P). It is the most modern vehicle with 100% low-floor area ratio and with a entry level of 320 mm above the top of the rail. Thanks to its pivotable joints between bogies and carbody the ForCity tramcar achieves excellent driving dynamics. Its drive is solved by the individually driven gearless synchronous traction motors controlled by the IGBT inverters. With its concept, the ForCity tramcar marks the top among the other low-floor tramcar vehicles. |
|
| UniTrack II – a set of HW and SW means for the assurance of control, diagnostic and communication functions of rail vehicles |
| Manufacturer: Unicontrols, a.s., http://www.unicontrols.cz
Exhibitor: Unicontrols, a.s., http://www.unicontrols.cz
Category: Commercial product (without further specification)
Annotation: UniControls presents UniTrack II – a set of HW and SW means for the assurance of control, diagnostic and communication functions of rail vehicles. UniTrack II is implemented with the use of the state-of-the-art HW as well as SW technologies in a full conformity with international standards, and therefore it is predetermined for the use not only on the domestic market, but also in foreign countries. The UniTrack system ensures, thanks to its integration, an interconnection of all the functions required which are provided for rail vehicles. UniTrack II is already applied in diesel-electric locomotives of the 709 and 719 series, in the metro train sets in China, it is prepared for metro train sets in St. Petersburg and a comprehensive solution has been designed for the upgrading of rail vehicles. |
|
| TankJet™ 4 Fluid-Driven Tank Washers |
| Manufacturer: Spraying Systems Co.
Exhibitor: Spraying Systems Czech, s.r.o.
Category: Commercial product (without further specification)
Annotation: For high-impact cleaning of large tanks, vats or vessels, our new fluid-driven TankJet 4 offers many benefits including better cleaning than competitive units. Providing more consistent impact over the entire pressure range, TankJet 4 tank washers remove even the stickiest of residues. |
|
| Liftkar HD Dolly 330 |
| Manufacturer: SANO Transportgeräte GmbH
Exhibitor: Ash, s.r.o.
Category: Commercial product (without further specification)
Annotation: With the Liftkar HD series SANO expands its product range of modular powered stairclimbers for loads of up to 330 kg. |
|
| Tansun Apollo, an electric quartz industrial heater |
| Manufacturer: Tansun Limited Spectrum House, http://www.tansun.com
Exhibitor: Able electric, s.r.o., http://www.tansun.cz
Category: Energetically effective commercial product
Annotation: Tansun Apollo, an electric quartz industrial heater with power of 6 kW uses the technology of new generation quartz lamps that makes use of infrared radiation with a wavelength of 1200 mm and a temperature of 2600 °C. As a result, the heater is 2.5 times more effective than standard infrared heaters being used up to now. |
|
| MKM-6 Semiautomatic gauge for measuring of parallel gage blocks |
| Manufacturer: Mesing, s.r.o.
Exhibitor: Mesing, s.r.o.
Category: Commercial product (without further specification)
Annotation: MKM - 6 is the first semiautomatic gauge for measuring of gage blocks manufactured in Europe. It builds on hand-operated gauge MKM – 3, of which MESING has already installed about 60 units in domestic and foreign countries.
The operator inserts the gage block to the measuring place and further process, including evaluation, will be carried out automatically. MKM - 6 compares the measured gage block in 5 points with etalon gage block in its center point, in accordance with the normative regulations. MKM - 6 is able to achieve repeatability about 10nm. This is due to:
• the new design conception with a very solid cast-iron stand (minimizing the influence of vibration, shock and temperature changes)
• the automatic shock-free shifting of the controled and etalon gage block in the measuring place
• using of 2 inductive transducers with pre-tensioned linear ball bearing and strenghtless vacuum retracting of the measuring tip
• special electronic evaluation and control unit with special-purpose software. |
|
| VCC 1200 |
| Manufacturer: AXA CNC stroje, s.r.o
Exhibitor: AXA CNC stroje, s.r.o
Category: Commercial product (without further specification)
Annotation: The VCC (Vertical Compact Centre) was developed as a small machining centre with a moving column specially for production in workshops. Contrary to the shuttle machine (maching at several places), the VCC is mainly used for manufacturing individual pieces and small lots. Thist flexible, versatile and user-friendly machine whose dimensions have been optimalized in terms of space requirement and costs is ideal for cost-effective production of standard small and medium-sized workpieces. A large number of options and accessories such as enclosed working area, inner cooling and chip conveyor are available for this machining centre, ansuring that it can be used for a wide range of applications. |
|
| LCS 1.4 S |
| Manufacturer: Tsurumi (Europe), GmbH, http://www.tsurumi-europe.com
Exhibitor: Sonnek Engineering, s.r.o., http://www.sonek.com
Category: Commercial product (without further specification)
Annotation: TSURUMI – Submersible water pump ideal for removal of residual water
♦ Removing down to 1 mm level
♦ Continuous use under dry-run |
|
| AUTO-GPS |
| Manufacturer: Eurosat CS, s.r.o.
Exhibitor: Eurosat CS, s.r.o.
Category: Commercial product (without further specification)
Annotation: Auto – GPS offers superior Real-Time GPS web based satellite tracking solutions to both commercial and private consumers. We provide detailed monitoring of fleet vehicles, cars, ships, trucks, construction equipment, and people. Empowering you to efficiently manage mobile assets, lower operation expenses, and improve personnel accountability. |
|
| Machine ULTRASONIC 20 linear ( HSC – ULTRASONIC) |
| Manufacturer: Sauer GmbH
Exhibitor: DMG Czech s.r.o.
Category: Commercial product (without further specification)
Annotation: Machining of advanced materials ( ceramics, glass, hardened steel, corundum, SiC) with ULTRASONIC technology and high-speed cutting(HSC) - milling on one machine only.
5-axis simultaneous machining with integrated NC swivel/rotary table, possibility of further automation with robotics
Ultrasonic actuator HSK-32, spindle with up to 42000 rpm, rapid traverse 40m/ min, high dynamics with acceleration >2g
Field of application: medical-dental industry, micromechanics and precision engineering, optical industry, die and mold industry.
Compact and stabile design monoBLOCK with footprint 3,5m2 |
|
| Pressure sensors series DSP |
| Manufacturer: BD Sensors, s.r.o., http://www.bdsensors.cz
Exhibitor: BD Sensors, s.r.o., http://www.bdsensors.cz
Category: Innovative exhibit created provably in cooperation of the companies with Czech research institution
Annotation: Pressure sensors series DSP are determinated to be integrated into electronic pressure transmitters for liquids and gases compatible with steel 1.4435 or Si – available ranges starting from 10mbar up to 1000 bar.
Due to optimized design of the diaphragm in combination with a new assembling concept an improvement of non-linearity, thermal behavior and long-term stability - compared to similar products - has been achieved.
Furthermore, customers will profit from short delivery times and attractive prices. |
|
| ABC Control 1000 Automat |
| Manufacturer: Labortech, s.r.o.
Exhibitor: Labortech Trading s.r.o.
Category: Commercial product (without further specification)
Annotation: The automatic device ABC Control is a single-purpose testing device in the precision category 1, complying with the European standards for testing devices fulfilling the requirements prescribed by the norm -EN ISO 75001-The automatic device has been developed for 100% control of PKW plates (i.e. plates for passenger car clutches), i.e. testing the thrust, springing and drag of the plate. The device is equipped with automatic manipulators designed for loading, sorting and removing the plats from the machine. |
|
| The system of monitoring status influentials processing machines |
| Manufacturer: Sp-Tech, s.r.o.
Exhibitor: Sp-Tech, s.r.o.
Category: Commercial product (without further specification)
Annotation: The system of monitoring status influentials processing machines. |
|
|
|
|
|
